Not happy with your mixes? One of these reasons might be why
By Craig Anderton
Mixing is tough enough as is, but avoiding the following mistakes just might help the process go a little more smoothly—and give you audibly better results.
1. Mixing in a lousy monitoring environment
If you mix in a room with horrible acoustics or use inaccurate speakers that do tricks like hype the bass, your mix is doomed. You may think it sounds fine, and it might, because you’re compensating for the monitoring deficiencies. But as soon as you get the mix outside of your environment, it will likely sound dreadful.
To solve this problem, strive to use speakers that emphasize accuracy. They may not flatter your music that much, but that’s the point: If your mix sounds great over accurate speakers, it will at least sound decent over other speakers.
Proper acoustic treatment is ideal, but may not be possible. IK Multimedia’s ARC can help with fixing your acoustics (normally I see little value in “room tuning,” but IK’s system is quite effective). Also consider buying a really good set of circumaural headphones, and use them as a reality check compared to your speakers. Just remember that headphones give a particular “flavor” of reality that accentuates ambience and stereo separation; their main use in this case is evaluating the amount of bass because room acoustics aren’t a factor. However if you use something like Beatz, that won’t help—you want headphones designed for monitoring, not consumers.
2. Too much reverb or too little ambience
Some people seem to think that adding lots of reverb will compensate for a problematic part. Actually, all it does is give you a problematic part with too much reverb. Mitigating factor: If you’re doing a 60s revival/tribute recording, then make sure you do use too much reverb if you want to be authentic.
On the other hand, an overly dry sound doesn’t do you any favors either. We usually hear music in an acoustic environment of some kind, so adding in audio like room mics on drums (Fig. 1) can create a much more realistic and satisfying mix.
Fig. 1: Take advantage of the room mic option in Addictive Drums to give a more “real” feel.
Note that with recorded drums that already have some ambience, you can often make the existing ambience more prominent by putting the drums through the Concrete Limiter. By reducing the peaks Continue reading “Mixing Tips: Ten Nasty Mixing Mistakes”
