How TC Spitfire used the ProChannel on the track “Surrender;” Currently #3 on Billboard Club Chart

Congratulations to Paul Oakenfold and TC Spitfire who found themselves at #3 on the Billboard Dance Club Songs this past week with the track Surrender.

The track was written by Paul, TC and J Hart who also sang the track.  TC Spitfire who is a passionate SONAR X1 Expanded user co-produced and mixed the track using a combination of all the ProChannel modules.  “This new era with the ProChannel and X1d [Expanded] is on a serious elevated level.  The combination of the modules has me staying more and more inside SONAR natively,” TC told us.

On a daily basis, TC is very busy individual.  Between writing new music, producing, mixing and remixing, he finds himself a bit overextended these days and “taking it and enjoying it while it’s there.”  Most recently, he has worked with artists such as Cher, Matt Goss, Matt Morris and Jean Baptist – and that is just in the recent past.  “On a daily basis I will jump from remixing a track for 4 hours, to writing in another studio for 4 hours, and then back to our lab for another however-long-it-takes-session – for the next barrage of musical craziness.”

For the track Surrender which is currently charting on the Billboard Dance Club Chart, TC collaborated with both Paul Oakenfold and J Hart on the writing side and then built and mixed the song completely in SONAR X1 Expanded. 

* * * * * * * * * *

CW AR: This vocal sound is huge in this track.  What was some of the processing involved?

TC: On the vocal track I used the new Hybrid mode in the ProChannels QuadCurve EQ.  I cut quite a bit of the low end off and had quite a bit of mids popping for this track around 1.8k.  I was able to surgically cut out some other frequencies in the mids to get the vocals away from other keyboard parts in that range.

On top of that, I used the PC4K channel compressor along with a slight touch of the Softube Saturation Knob with the switch on the “high” setting.  I also sent multiple lead vocal tracks out to a lead vocal bus which had the PCCL Limiter on it for a slight boost and some tightening.

CW AR: This track and all your tracks for that matter are really tight, what are the main factors for you in achieving this sound?

TC: It’s pretty simple, but it’s also pretty complicated.  It’s simple, because most of it has to do with compression, EQ and limiting, which are 75% from the ProChannel in my tracks.  It’s complicated because carving the frequencies, making the decisions on where to compress and how much, and what to use a limiter on – all factor in.  Sometimes, over compressing and using too many limiters will just make a song sound flat-lined and not breathing.   I think another factor is not using too many of the same compressors or EQ’s on every single track.  I really like mixing up my inserts.  On some tracks I will use the 76 and others I will use the Softube compressor.  I even use the PC4K bus compressor on tracks – call me crazy – haaa.   There are no rules in the digital world and use my ear and the tools SONAR X1 Expanded provides to get the sound to where I need it to be.

In the next year you will be hearing a lot more from Paul Oakenfold and TC as a new deal was just signed with Sony Records.  As soon as the details are released on that we will keep you posted.  Until then, you can check out SONAR X1 for free here.

SONAR X1 is the most intuitive D.A.W. on the market today.  It’s easy to get up and running, and it’s just as easy with practice and experience to become an advanced user.  If you are running windows, and you are a musician, now is a great time to pull the trigger with the SONAR X1 Advanced Workshop Giveaway Promotion.

“SURRENDER” [Completely recorded, mixed and mastered in SONAR X1 Expanded:]

How Building Cost Effective Acoustic Treatment for the Music Studio Will Help Your Music Production; Final Links and Video

A 3 Part Resource for D.I.Y. Acoustic Sound Treatment and Room Development

As a conclusion to my series on Building Cost Effective Acoustic Treatment, I wanted to put a link to all three articles in one place along with a “before and after” video.  I also wanted to put this up on our forum in one place in case anyone has any questions about what I did with my studio.  If you are planning on trying to save some money by building your own acoustic treatment panels these three articles are worth reviewing.

Part 1: Building a sound cloud over your mix position

Part 2: Building corner traps

Part 3:  Building wall panels

The effort to build all this acoustic treatment was not minimal, but well worth it.  Besides saving a lot of money I was able to customize the panels so that they fit the room well.  Using the QuadCurve EQ which comes with SONAR X3Producer is where I can really tell the difference in my environment.  The QuadCurve EQ is very advanced and allows the user to surgically tailor frequencies.  Now that I have my room treated properly, I can really hear the difference between the EQ modes.

So the first step is to get going with a version of the SONAR X3 family, and then do your homework and figure out the best listening environment FOR YOU.

How Building Cost Effective Acoustic Treatment for the Music Studio Will Help Your Music Production; Part 2: Corner Traps

So maybe you have SONAR X1 Production Suite running on a killer computer, and now you might have a sound cloud over your mix position; what’s next?  Last week I exemplified how I built and installed a hanging sound cloud and this week I will go into detail how I built corner traps to help tame my unorthodox (square) production room.  Before reading this post, you may want to visit my article from last week which goes into some detail on room shapes.

My room, unfortunately for me is dead square.  This is about the worst case scenario so I had to do some research and talk to a lot of friends who are acoustic professionals such as Gavin Haverstick of Haverstick designs.  With my room being about 13.5’ x 13.5’ and 7.5’ ceilings, he has my mix position at 62” off the front wall.  So with my positioning about right, and a sound cloud overhead to take out the first ceiling reflections, the next thing to do was try to knock out the corners of the room where bass frequencies could become a big problem.

I decided to make custom corner traps based on my personal situation.  Once again, every room and everyone’s needs are different, so if you are on a tight budget, I think it’s best to first figure out what’s important to YOU.  For my situation, here were my goals for corner traps:

  • Cost effective
  • *Less square footage (I will discuss this below)
  • Aesthetically pleasing to the eye
  • Effective bass trapping
  • Light-weight

Continue reading “How Building Cost Effective Acoustic Treatment for the Music Studio Will Help Your Music Production; Part 2: Corner Traps”

Cakewalk Artists on Both PC and Mac Are Off to an Enormous 2012

Cakewalk Artists on Both PC and Mac are off to an Enormous 2012

We are well on our way into 2012 and many artists relying on various Cakewalk products are off to an enormous year.  I’ve been fortunate enough to have spent some time with most of these artists recently, and even more fortunate to have worked with a few in some creative capacities using SONAR X1 in the recent past.  There are some common threads that these artists share, but I think the most important element is that they are all working ridiculously hard in their own circles.

Murray Daigle

[Toronto, ONT, Canada]  Murray Daigle is a very talented Canadian Producer/Mixer/Songwriter out of Toronto Canada.  He just relocated to a new space in Toronto and opened a new studio running SONAR X1 Expanded.  A big “congratulations” goes out to him on a “Certified Gold” record for Neverest’s track “About Us” along with a SOCAN #1 Award (co-written and mixed on Cakewalk Sonar X1.)  Murray also produced and co-wrote other tracks on the Neverest release which came out in January and is already working on material for another release later this year. Continue reading “Cakewalk Artists on Both PC and Mac Are Off to an Enormous 2012”